Fully Automatic Pipe Cutting Machine

A fully automatic 1-Axis Servo cutting machine with bundle cut option. Servo- PLC control machine with 7" touch screen interface with programmable cutting schedule. User can feed in 5 different sizes, each size can have counter and resettable counter for complete data keeping. Machine RPM is controlled through PLC. 6 interlock/ protection (alarms) eliminate malfunction or accident due human or other circumstantial mistakes/error. Length tolerance within +/- 0.10 mm. current overload interlock through Software is very accurate, thus prevents blade breakage up to 80%.

Main Features

• Auto feed (Bunch Cutting) – Auto Clamping – Auto Cut piece Ejecting, PLC & Servo Control Machine, Length
• Accuracy within +/- 0.10 mm. programmable up to 5 different lengths
• Main Motor 7.5HP, Output RPM = Variable between 12-120
• Material Feeding is servo operated
• Clamping Source is Hydraulic
• Cutting feeding source – Hydraulic

A fully automatic 2-Axis Servo controlled machine which as both material feeding and cutter feeding source as servo motor. This fully automatic machine can create 1000 different cutting programs. Each programs will have information such as your given name, nos of pipes in bunch which will be cut, appropriate RPM for the same and defined cutter path with variable cutter travel such as T1, T2, T3 (slow cutter feed at larger load and faster cutting feed at lower load in one single or bunch of pipes). 5 different length combination (within 6 m), and applied cutter thickness. Once this data is created as programmed, then it just need to be recalled from the drop down when you change job. This reduces 80% of your changeover time, same from human errors and most important, archives best blade life and least cutter cycle time. Total length tolerance is maintained with +/- 0.10 mm. with exact cut piece counting even with bunch cutting. Machine software has many interlocks which prevents many human errors which is responsible for cutter breakage other accidents. Machine as fully automatic lubrication system which will keep lubricating the all the required parts of the machine on regular intervals. Administrator has full control on the machine utility including data of hours of machines usages and 3 different counters.

Main Features

• Auto feed (Bunch Cutting) – Auto Clamping – Auto Cut piece Ejecting, PLC & Servo Control Machine, Length 
• Accuracy within +/- 0.10 mm. programmable up to 5 different lengths
• Main Motor 7.5HP, Output RPM = Variable between 12-120.
• Material feeding is servo operated
• Cutting feeding source – Hydraulic.
• Clamping feeding source – Hydraulic.

Fully automatic cutting machine with bundle cut option. Standard 90 degree. PLC control machine with 3.5” mono screen interface or 7” inch touch screen interface. Length tolerance within +/- 0.10 mm. self written software allows continues upgrades which are free for all previous machine owners. On-board error detection system allows immediate help and repair of machine of most of malfunction. Manual use option to use the machine on manual mode.

Main Features

• Auto feed (Bunch Cutting) – Auto Clamping – Auto Cut piece Ejecting, PLC Control Machine, pneumatic Length feeding, Accuracy within +/- 0.20 mm
• Main Motor 5HP (2800), Output RPM = Variable between 2000-4800
• Clamping Source is Pneumatic, Cutting feeding source – Hydro Pneumatic